Panasonic KX-NS1000 Programming Manual page 686

Hide thumbs Also See for KX-NS1000:

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button

Parameter Selection (for Time Service - Automatic/Manual)

Specifies the Time Table to be used when the Time Service Switching Mode is set to Automatic.

Table 1–Table 32 or Table 1–Table 128

The maximum number of time tables (1 per tenant) depends on the System Capacity Selection setting

made when the Easy Setup Wizard was run for the PBX. If the System Resource Type was selected, the

maximum number of tenants (and therefore, time tables) is 128. If the Standard Type or IP-Extension

Type was selected, the maximum number of tenants is 32. For details, refer to "5.4.1 Easy Setup

Wizard" in the Installation Manual.

Maintenance Console Location

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button

Feature Guide References

5.1.4 Time Service

Parameter Selection (for SDN)

Specifies the delayed ringing setting for calls arriving at an SDN button.

Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring

Maintenance Console Location

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button

Feature Guide References

2.9.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension

Extension Number (for DSS)

Specifies the number of an extension to be accessed.

Max. 5 digits (consisting of 0–9)

Maintenance Console Location

12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button

Extension Number (for ICD Group)

Specifies the floating extension number of an incoming call distribution group to be accessed.

PC Programming Manual

Show Quick Links