Panasonic VL-V591 Installation And Operation Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Intercom System
  5. VL-V591
  6. Installation and operation manual

Panasonic VL-V591 Installation And Operation Manual

Lobby station
Hide thumbs Also See for VL-V591:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
Thank you for purchasing a Panasonic product.
Please read this guide before using the unit and save for future reference.
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan
http://www.panasonic.com
© Panasonic Corporation 2017
Installation and Operation Guide
Contents
System component .............................................................2
Included items .....................................................................2
For your safety ....................................................................3
Important safety instructions .............................................4
For best performance .........................................................4
Other information ................................................................4
Location of controls ............................................................5
Before installation ...............................................................6
Installing the lobby station .................................................7
Wiring schematic diagram ................................................10
How to program the settings ............................................12
Registering room numbers ..............................................13
Calling a room from the lobby station .............................15
(Personal Identification Number) ..................................15
Cleaning .............................................................................16
Specifications ....................................................................16
Other Infomation................................................................16
Lobby Station
VL-V591
Model No.
PNQX8620ZA
C0917MM1

Advertisement

Table of Contents
loading

Related Manuals for Panasonic VL-V591

Summary of Contents for Panasonic VL-V591

  • Page 1: Table Of Contents

    General Information Cleaning ................16 Specifications ..............16 Other Infomation..............16 Thank you for purchasing a Panasonic product. Please read this guide before using the unit and save for future reference. 1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan http://www.panasonic.com © Panasonic Corporation 2017...

  • Page 2: Introduction

    Lobby station Door station Model no. VL-MW251, VL-MV30, VL-MV71, The types and number of door VL-V591 VL-MV72, VL-MVN511, VL-MWD272, stations that can be connected differs VL-MWD273, VL-MW274, VL-MWD501 depending on the main monitor used. Refer to the documentation of your...

  • Page 3: Important Information

    Important Information For your safety To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. WARNING Power connection L  U se only the power source marked on the unit. If you are not sure of the type of power supplied to the building, consult your dealer or local power company.

  • Page 4: Important Safety Instructions

    Important Information CAUTION Installation and relocation L  T he power plug is used as the main disconnect device. Ensure that the power outlet is installed near the product and is easily accessible. L I nstall the unit securely adhering to the instructions in this guide to prevent it from falling off the wall. Avoid installing onto low-strength walls, such as gypsum board, ALC (autoclaved lightweight concrete), concrete block, or veneer (less than 18 mm thick) walls.

  • Page 5: Controls

    Controls Location of controls Main unit Upper cabinet front view A Camera B Lens cover C BUSY indicator L L ights when the called main monitor station is in use. D DOOR OPEN indicator L L ights when the door of the common entrance is opened.

  • Page 6: Installation

    Installation Before installation Important: LTo avoid malfunction or communication disturbances, do not install the lobby station in the following locations: – Places where vibration or any other kind of impact occurs. 5 mm 5 mm – Places near hydrogen sulfide. L D o not place other devices or obstacles in the area around 15 mm the main unit shown in the figure.

  • Page 7: Installing The Lobby Station

    Power Supply Unit (VL-PS241) side: 1 25 mm 2 7 mm Lobby Station (VL-V591) side: 1 52 mm or more 2 12 mm U se the cable binder (8) (accessory) to secure the DC...
  • Page 8 Installation Installing the main unit After installing the power supply unit and the flush mounted box (page 7), install the main unit. Important: L O n the bottom surface of the upper cabinet, there are holes to allow water to drain. Do not cover them up when installing. Separate the upper cabinet and lower cabinet.
  • Page 9 Installation P ut the wires and the DC cable from the flush mounted box through the rear gaps of the lower cabinet. Connect the upper cabinet cable connector firmly with the connector on the lower cabinet. I nstall the lower cabinet on the flush mounted box using B ...

  • Page 10: Wiring Schematic Diagram

    Installation Wiring schematic diagram Set up correctly according to the following wiring schematic diagrams and “Wire type and distance” (page 11). 20 main monitor stations can be connected to terminals 1 to 20 on the lobby station. L F or main monitor station system, refer to the operating instructions of the main monitor stations. An example is shown below.
  • Page 11 Installation Setting the main monitor stations “LOBBY CONNECTION” setting: L A fter connecting to the main monitor stations to the lobby station, change the setting of “LOBBY CONNECTION” to “YES” using the main monitor stations. (Refer to the Operating Instructions of the main monitor stations.) “DOOR KEY”...

  • Page 12: Programming

    Programming How to program the settings To register room numbers or program other settings, you need to enter programming mode using the PROGRAM switch on the rear of the upper cabinet (page 5). To press the PROGRAM switch, use a pointed object such as a pen. BUSY indicator DOOR OPEN indicator {CALL}...

  • Page 13: Registering Room Numbers

    Programming Registering room numbers Register each room number to each terminal number (01-20) (page 10). Press and hold the PROGRAM switch for about 2 seconds during standby. Enter {0}{0}{1}, then press {CALL}. Enter the desired terminal number (001-020) (in 3 digits), then press {CALL}. L T o correct the number, press {CLR}, then repeat this step.

  • Page 14: Setting The Pin (Personal Identification Number)

    Programming Setting the PIN (Personal Identification Number) When a separate door opener is connected to the lobby station, the PIN is used to open the door of the common entrance. The default PIN is “0000” (the feature is deactivated). Once you change the PIN, the door can be opened using the PIN. Press and hold the PROGRAM switch for about 2 seconds during standby.

  • Page 15: Using The Lobby Station

    Using the Lobby Station Calling a room from the lobby station Enter the room number (set in “Registering room numbers” on page 13) using the keypad. L T o correct the number, press {CLR}, then enter the room number again. Press {CALL} to call the room.

  • Page 16: General Information

    For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection centre, registered dismantler or recycler, or Panasonic service centre when disposing of this product. Please see the Panasonic website for further information on collection centres, etc., or call the toll-free number below. Website: http://www.panasonic.com/in/corporate/sustainability/...

Table of Contents