Miele PG 8581 Operating Instructions Manual page 61
Dental washer-disinfector
Hide thumbs
Also See for PG 8581:
- Operating instructions manual (144 pages) ,
- Supplementary document (40 pages) ,
- Operating instructions manual (144 pages)
Table of Contents
Advertisement
Resetting the
counter
Setting the interval
The counter for the cleaning interval may be reset only after
cleaning has been completed.
Reset
Yes
No
–
Yes
The counter is reset.
No
–
The counter will not be reset.
Use the and arrow buttons to select an option and press OK to
confirm your selection.
The interval depends on the number of programs sequences and
must be set on the basis of usage and the expected number of
particles/solids in the soiling.
Example of tubular filter:
For weekly cleaning with 2 program sequences per day and 5
workdays in the week, this yields an interval of 10 (2 x 5 = 10). With a
higher incidence of particles, a shorter interval should be selected in
order to clean the tubular filter several times weekly. With a lower
incidence of particles, weekly cleaning is sufficient.
Miele recommends that you clean the tubular filter after every 10
program sequences.
The setting value is entered in increments of 5. The possible range is
shown in the bottom line of the display.
Use the arrow buttons (higher) and (lower) to set the Interval.
Press OK to save the setting.
Interval
10
(5 - 100)
Settings
61
Hide quick links:
Advertisement
Table of Contents
