3
Enter a password, press <Enter>, re-
and press <Enter> again.
The password can be up to 8
alphanumeric characters. Special
characters are not allowed.
4
the Setup Notice window, press
<Enter>.
The supervisor password has been
set.
The supervisor password is required
to turn the computer on or to enter the
BIOS Setup.
Setting a User Password
The User Password restricts access
However, the Setup items that can
Password.
supervisor password must have been
password also deactivates the user
password.
In the Set User Password item, press
<Enter> and complete the procedures
from Step 3 of Setting a Supervisor
Password.
Setting Up a Boot Password
To setup a boot password, the
administrator password (Set Supervisor
Password) should be set in advance.
Set the Password on boot item to
Enabled.
Once a boot password is set, you have
to enter a password to boot up the
computer.
146