Display Vlan - HP 12500 Series Command Reference Manual
Routing, layer 2 - lan switching
Hide thumbs
Also See for 12500 Series:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
Field
Link
Protocol
Main IP
Description
Related commands
reset counters interface vlan-interface
display vlan
Use display vlan to display VLAN information.
Syntax
display vlan [ vlan-id1 [ to vlan-id2 ] | all | dynamic | reserved | static ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan-id1: Displays information about a VLAN specified by its VLAN ID in the range of 1 to 4094.
vlan-id1 to vlan-id2: Displays information about VLANs that are specified by a VLAN ID range. The
vlan-id1 and vlan-id2 arguments specify VLAN IDs and are in the range of 1 to 4094. The vlan-id1
argument cannot be greater than the vlan-id2 argument.
all: Displays all VLAN information except for the reserved VLANs.
dynamic: Displays the number of dynamic VLANs and the ID for each dynamic VLAN. The dynamic
VLANs are generated through GVRP or those distributed by a RADIUS server.
reserved: Displays information about the reserved VLANs. Protocol modules determine which
VLANs are reserved VLANs according to function implementation, and reserved VLANs serve
protocol modules. You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
Description
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To
recover its physical state, run the undo shutdown command.
Protocol connection state of the interface:
•
UP.
•
DOWN.
•
UP(s).
Main IP address of the interface.
Description of the interface.
99
Advertisement
Table of Contents
