Introduction IMPORTANT SAFEGUARDS (continued) 13. LIGHTNING 27. LASER BEAM To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the unplug it from the wall outlet and disconnect the antenna or cable system.
Introduction Notes on discs (continued) Contents Introduction Basic playback Playing a disc ..........31 IMPORTANT SAFEGUARDS ......2 About this owner’s manual Playable discs Precautions ............6 Notes on discs ........... 7 Advanced playback This owner’s manual explains the basic instructions of This unit can play the following discs.
Introduction Identification of controls (continued) Inserting batteries Slide the battery compartment Install two “R03/AAA” batteries Replace the compartment (supplied), paying attention to cover in the direction of the cover. Remote control arrow. the polarity diagram in the battery compartment. The instructions in this manual describe the function on the remote control. See the page in for details.
To AUDIO(L/R)/VIDEO IN (not supplied) ® video compatible DVD player, such as a Toshiba DVD player with ColorStream can greatly enhance picture quality and performance. Note: Picture might be muted for some VCR playback. This is not a malfunction of this unit.
Connections Basic setup POWER Power source Setting the language This TV/DVD can display the on screen language in English, Spanish or French. Select the language you prefer first, then proceed with the other menu MENU options. / / / ENTER Power connection TO USE AC POWER 1.
TV operation RECALL TV operation (continued) Closed captions GAME VOL +/– WHAT IS CLOSED CAPTIONING? CLOSED SLEEP This television has the capability to decode and display closed captioned CAPTION MUTE television programs. Closed captioning will display text on the screen for CH RTN hearing impaired viewers or it will translate and display text in another CH +/–...
TV operation Picture control adjustment/ Selecting the color temperature Adjusting the picture preference MENU MENU CANCEL Picture controls are factory preset but you can adjust them individually as follows: / / / / / / And also you can select four picture modes—Standard, Sports, Movie, and Memory—as described in the following table: ENTER ENTER...
Basic playback Playing a disc (continued) To obtain a higher quality picture POWER Occasionally, some picture noise not usually visible during a normal broadcast may appear on the TV screen while playing a DVD video disc because the high PLAY resolution pictures on these discs include a lot of information.
Advanced playback Changing angles/Title selection/DVD menu Program playback/Random playback 0–9 You can arrange the playback order of tracks or files on the disc. And also TOP MENU the unit selects tracks or files at random and playback them. These feature CANCEL DVD MENU works for Audio CD, Video CD and MP3/WMA/JPEG CD.
Advanced playback MP3/WMA/JPEG CD operation 0–9 This unit can play back the MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a Windows-PC with CD-R/RW drive and a MP3/WMA/JPEG-encoding TOP MENU Software (not supplied). The Apple-HFS-System cannot be played.
Function setup Setting details Setting details To change the parental level Sound Language Picture Language Picture Sound Parental Other Language Picture Sound Parental Other Language Picture Sound Parental Other 1) Press to select “Password”. Menu English English Tv Screen 2) Press Number buttons (0–9) to enter the password Subtitle Automatic Francais...
Others Troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE SYMPTOMS POSSIBLE SOLUTIONS...
IN THE U.S.A. SOME STATES OF THE U.S.A. DO Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original NOT ALLOW LIMITATIONS ON HOW LONG AN consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER...
Page 16
CAUTION THIS LCD COLOR TELEVISION EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CARE- FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
IMPORTANT SERVICE SAFETY INFORMATION Safety precautions to be followed during servicing: Parts marked with an are critical parts for safety. Replace only with the one described in the parts list. Before returning the DVD product to the customer, make the appropriate leakage current check or resistance measurements to ensure that exposed parts are properly insulated from the supply circuit.
Page 18
IMPORTANT SAFEGUARDS READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
Page 19
IMPORTANT SAFEGUARDS (CONTINUED) OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and support- ing structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Page 20
EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING NEC-NATIONAL ELECTRICAL CODE ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A A1-5...
WHEN REPLACING DVD DECK [ When the removal of the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be damaged.
DISC REMOVAL METHOD AT NO POWER SUPPLY Remove the Back Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) Slide the Rack Loading toward the arrow direction by hand to release the lock. (Refer to Fig. 1) Take out the Disc from the DVD Deck. Be careful not to scratch on the Disc. DVD Deck Rack Loading Fig.
Page 23
TABLE OF CONTENTS • OWNER'S MANUAL CAUTION ............................ A1-1 PREPARATION OF SERVICING ....................A1-1 IMPORTANT SERVICE SAFETY INFORMATION ..............A1-2 IMPORTANT SAFEGUARDS ..................... A1-3~A1-5 WHEN REPLACING DVD DECK ....................A1-6 DISC REMOVAL METHOD AT NO POWER SUPPLY ............. A1-7 PARENTAL CONTROL-RATING LEVEL .................. A1-7 TRAY LOCK ..........................
GENERAL SPECIFICATIONS LCD Size / Visual Size 14.0 inch / 356.4mmV System LCD Type Color TFT LCD Number of Pixels 640(H) x 480(V) View Range Left/Right 85/85 degree Up/Down 85/85 degree Color System NTSC Speaker 2 Speaker Position Front Size 1.5 x 2.7 inch Impedance 8 ohm...
Page 25
GENERAL SPECIFICATIONS Temperature Operation +5oC ~ +40oC Storage -20oC ~ +60oC Operating Humidity Less than 80% RH On Screen Menu(TV) Display Menu Type Icon TV Setup Picture Audio Picture Preference Color Temperature Auto Dimmer CH Tuning TV/CABLE Add/Delete Auto CH Memory V-Chip Language Clock Set...
Page 26
GENERAL SPECIFICATIONS G-10 On Screen Menu (DVD) Display Menu Type Character Language Menu Subtitle Audio Picture TV Screen Size(4:3) OSD Display On/Off JPEG Interval Select Files Sound DRC (Dynamic Range Control) dts Decode Output(5.1ch/ 2ch) Surround On/Off Center On/Off Sub Woofer On/Off Parental Password Lock/ Un Lock Rating Level...
Page 27
GENERAL SPECIFICATIONS G-13 Remote Unit RC-JR Control Glow in Dark Remocon Format Custom Code 71-8E h Power Source Voltage(D.C) UM size x pcs UM-4 x 2 pcs Total Keys 47 Key Keys Power Play Stop Search+ Search- Skip+ Skip- Slow+ Slow- Pause Call...
Page 28
GENERAL SPECIFICATIONS G-14 Features CABLE Auto Shut Off Auto CH Memory V-Chip Type USA Type Auto Search PC Monitor Input S-Video Input Game Position FM Transmitter Surround Stable Sound Energy Star Closed Caption Comb Filter Power On Memory Freeze frame Parental Lock (DVD Only) Tray Lock JPEG...
Page 29
GENERAL SPECIFICATIONS G-16 Interface Switch Front Power (Tact) Channel Up Channel Down Volume Up Volume Down Play Eject Skip+, Search+ Skip-, Search- Still/Pause Stop Main Power SW Input Select Rear Main Power SW Indicator Power Yes (Green) Stand-by On Timer Terminals Rear Video Input 1...
Page 30
DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS 1-3: BACK ANGLE (Refer to Fig. 1-3) Remove the 3 screws 1. AND P.C. BOARDS Remove the screw 2. 1-1: HINGE ASS'Y (Refer to Fig. 1-1) Remove the 2 screws 1. Remove the 2 screws 1. Remove the Jack Plate and Jack Shield in the direction of Remove the Hinge Cover in the direction of arrow (A).
Page 31
DISASSEMBLY INSTRUCTIONS 1-5: DVD DECK (Refer to Fig. 1-5) 1-7: LCD PCB (Refer to Fig. 1-7) Remove the 2 screws 1. Disconnect the following connectors: Remove the 2 screws 2. (CP101, CP705, CP1001, CP2201 and CP3803). Remove the 6 screws 1. Remove the DVD Deck in the direction of arrow.
Page 32
DISASSEMBLY INSTRUCTIONS 1-9: LCD COVER/LCD PANEL/OPERATION PCB 1-10: REMOCON PCB/BACK LIGHT PCB (Refer to Fig. 1-9) (Refer to Fig. 1-10) Remove the 2 screws 1. Remove the 2 screws 1. Remove the Remocon PCB in the direction of arrow (A). Remove the Cover Shield in the direction of arrow (A).
DISASSEMBLY INSTRUCTIONS 2-2: TRAVERSE UNIT ROD/TRAVERSE UNIT HOLDER/ 2. REMOVAL OF DVD DECK PARTS CD DECK/INSULATOR (Refer to Fig. 2-2) 2-1: LOADING MOTOR ASS'Y/START SW PCB ASS'Y/ Remove the screw 1. END SW PCB ASS'Y (Refer to Fig. 2-1-A) Remove the Traverse Unit Rod. Remove the 3 screws 1.
Page 34
DISASSEMBLY INSTRUCTIONS 2-4: DISC L LEVER/DISC STOPPER/LOCKER STOPPER/ 2-6: LINK R ASS'Y/LINK L/LINK MID/LINK SPRING ROLLER GEAR (Refer to Fig. 2-4-A) (Refer to Fig. 2-6) Remove the screw 1. Remove the screw 1. Remove the Disc L Lever and Disc L Lever Spring. Remove the Link Spring.
Page 35
DISASSEMBLY INSTRUCTIONS 2-8: CLAMPER ASS'Y/DISC GUIDE ARM/DISC R LEVER (Refer to Fig. 2-8-A) Unlock the support 1 and remove the Clamper Ass'y. Unlock the support 2 and remove the Disc Guide Arm. Unlock the support 3 and remove the Disc R Lever. Clamper Ass'y Disc R Lever Disc Guide Arm...
Page 36
DISASSEMBLY INSTRUCTIONS 3. REMOVAL AND INSTALLATION OF FLAT 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using PACKAGE IC a tweezers and remove the IC by moving with the IC REMOVAL desoldering machine.
Page 37
DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thin- 1. Take care of the polarity of new IC and then install the tip Soldering Iron. (Refer to Fig. 3-8.) new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than a standard time in the appropriate condition.
SERVICING FIXTURES AND TOOLS Ref. No. Part No. Parts Name Remarks JG176 Up-Date Disc JG176 Up-Date Disc Up-Date of the Firmware APJG176052 RE-WRITE FOR DVD FIRMWARE Turn on the power, and set the DVD mode. Confirm that the “No Disc” will be appeared on the screen. Press both VOL.
Page 40
WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. NOTE: No need setting for between INI 10 and INI 4F due to the adjustment value. Table 1 Turn on the POWER, and set to the TV mode.
Page 41
ELECTRICAL ADJUSTMENTS BEFORE MAKING ELECTRICAL FUNCTION FUNCTION ADJUSTMENTS GCUT W RCUT M BCUT W Read and perform these adjustments when repairing the GCUT M DRI1 W circuits or replacing electrical parts or PCB assemblies. BCUT M DRI2 W DRI1 M MD6 W CAUTION DRI2 M...
Page 42
ELECTRICAL ADJUSTMENTS 2-2: WHITE BALANCE 2-3: Confirmation of Fixed Value (Step No.) NOTE: Adjust after performing CUT OFF adjustment. Please check if the fixed values of each the adjustment items are set correctly referring below. Place the set with Aging Test for more than 15 minutes. Receive the gray scale pattern from the Pattern (RF/AV/GAME/DVD/COMPONENT MODE) Generator.
Page 43
ELECTRICAL ADJUSTMENTS 3. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CD7001 BACK LIGHT LCD PANEL CD2601 DVD PCB CP2301 CP2302 CD501 CD701 CP2601 LCD PCB DVD DECK CD103 CD102 CD807 CD804 CP101 SIDE JACK PCB CP801 CP701 CP102 CP103 CP104 J1001 CP1001 CP3805...
Page 46
MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) AC cord Remote control 300-75 Ω matching transformer AC ADAPTER BATTERY MANGAN 132, 133, 134, 135, 151 I1-3...
Page 47
DVD DECK EXPLODED VIEW (TOP VIEW) NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position. I2-1...
Page 48
DVD DECK EXPLODED VIEW (BOTTOM VIEW) PCB580 (START SW PCB ASS'Y) PCB590 M2301 (END SW PCB ASS'Y) NOTE: Applying positions AA for the grease are CLASS MARK displayed for this section. GREASE Check if the correct grease is applied for each position.