3.2.2
Mounting on linear actuators
For mounting on a linear actuator in accordance with DIN / IEC 534 (lateral mount per NAMUR)
a complete mounting kit is available, and consists of the items in the following table:
Fig. 4: Mounting kit for linear actuators
•
Lever (4) with follower pin, for stroke adjustment 10 ... 35 mm (0.39 ... 1.38 inch) or
20 ... 100 mm (0.79 ... 3.94 inch)
•
Follower guide (13) with two screws (10), spring washers (11) and clamp plates (12)
•
Mount bracket (3) with two screws (6) and two shims (5)
•
Screw (1) and shim (2) for mounting to cast iron yoke
•
Two U-bolts (7) with two shims (8) and two nuts (9) for mounting to columnar yoke
Required tools:
-
Wrench, size 10 / 13
-
Allen key, size 4
CI/TZIDC/110/120-EN
TZIDC, TZIDC-110, TZIDC-120
Mounting
13