Viewing and Changing a Site
This feature allows you to view the name of the current site or
forces your radio to change to a new one.
Viewing the Current Site
Procedure:
1
Press the preprogrammed Site Displ/Srch button.
2
The display momentarily shows the name of the current site
and its corresponding received signal strength indicator
(RSSI).
Changing the Current Site
Procedure:
1
Press and hold down the preprogrammed Site Displ/Srch
button.
2
You hear a tone and the display shows momentary
Scanning site.
3
When the radio finds a new site, it returns to the Home
screen.
Programming Over Project 25 (POP 25)
(ASTRO 25 and ASTRO Conventional)
This feature enables configuration data to be upgraded to your
radio over-the-air. This feature retains full use of the radio
during the configuration data transfer without interrupting
communication. The upgrade pauses to give priorities to voice
call, and continues after the voice call ended.
Once a configuration upgrade is downloaded to your radio, you
can install new changes immediately or delay changes to be
installed on the radio when it is being powered up. Your radio
can also be configured to allow you to accept or reject an
upgrade.
Note:
This feature must be preprogrammed by a qualified
radio technician. Check with your dealer or system
administrator for more information.
41
English