Table of Contents
Advertisement
APPLICATION EXAMPLE
DOWNLOADING THE
CONFIGURATION FILE
9–18
Save the configuration file for future use. The save command is available in File menu. The
following procedure demonstrates how to save the configuration file to the D485.
1.
To open the saved configuration file, select the File > Open menu item. The following
window will appear.
Figure 9-29: Opening a saved configuration file
2.
To connect to the D485, select the Tools > Port menu item, then select the port
connected to D485.
3.
Click on the Connect icon.
4.
Verify that the green LED is shown in the right corner of the configuration tool, then
click the download icon in the toolbar. The download in progress bar will appear.
5.
If the D485 does not respond to the download, ensure all connections are OK and that
the port selection is valid. On some laptop computers, it might be worth trying the
other serial ports. Also ensure that no other software (such as any PLC communication
drivers) are blocking access to the serial ports.
Figure 9-30: Download in progress
D485 MODBUS TO DEVICENET CONVERTER – USER GUIDE
Advertisement
Table of Contents
