D-Link DSA-3100 User Manual page 40

Wireless service gateway

Hide thumbs Also See for DSA-3100:

Table of Contents

DSA-3100 Wireless Service Gateway User Manual

Figure 2-6 Sample Static Route

a.) Destination IP Address:

Specifies the target network IP or host IP. In this example we use network IP 192.168.202.0 as

the routed target.

b.) Destination Subnet Mask:

Specifies the target network mask. In the example, we use the subnet mask of network

192.168.202.0.

c.) Gateway IP Address:

Specifies the IP address of the next hop router. In the example, we set this to 192.168.200.253

as the 192.168.202.0 network is behind the router.

Click Apply

Note

： For the static route to work, the next hop route must also have added a static route to

forward all 192.168.100.0/24 IP packets to the DSA-3100, After clicking the Apply button, you

will see the added route is shown in the current running routing table. Click " View Routing

table " to verify.

Every change to the static route settings must be stored by using Save Setting function,

and restarts D-Link DSA-3100.

Table of Contents