Rip Output; Rip Poison-Reverse - HP FlexNetwork 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for FlexNetwork 3600 v2 Series:
- Command reference manual (479 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Examples
# Enable RIP process 100 to receive SNMP requests.
<Sysname> system-view
[Sysname] rip mib-binding 100
# Restore the default.
[Sysname] undo rip mib-binding
rip output
Syntax
rip output
undo rip output
View
Interface view
Default level
2: System level
Parameters
None
Description
Use rip output to enable the interface to send RIP messages.
Use undo rip output to disable the interface from sending RIP messages.
Sending RIP messages is enabled on an interface by default.
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip output
rip poison-reverse
Syntax
rip poison-reverse
undo rip poison-reverse
View
Interface view
Default level
2: System level
Parameters
None
Description
Use rip poison-reverse to enable the poison reverse function.
52
- Quick Links:
- Basic Ip Routing Commands
- Ip Route-Static
Hide quick links:
Advertisement
Table of Contents
