Panasonic KX-T336 System Reference Manual page 109

Hide thumbs Also See for KX-T336:

Table of Contents

3.11 DID Card

1. DID Card (KX-T96182) (for U.S.A. and Canada)

"DID" is marked.

Connection of the Central Office Line

To Terminal Board or

Modular Jacks from the

Central Office (CO).

• Insert the modular plug of the telephone line cord (2-conductor wiring) into the

modular jack on the DID card.

The DID port No.4 is equipped with "H (High)" and "L (Low)" leads.

If you connect a 4-conductor wiring cord to this port, the on/off status of the system can be detected

through "H" and "L" leads.

When the system is on : Ground is applied.

When the system is off : Ground is not applied.

View of TEL Jack (CO)

(L) and (H) are equipped for

the DID port No.4 only.

• Insert this card into a free slot.

Use 2- conductor (See "Note" below.)

DID Port No.1

DID Port No.2

DID Port No.3

DID Port No.4

DID Card (KX-T96182)

Show Quick Links

Table of Contents