LampSite
Installation Guide
Figure 6-14 Installing a pRRU3901
----End
6.4.4 pRRU3901 Installed on a Pole
A pRRU3901 can be installed on a metal pole indoors.
Procedure
Step 1 Determine the position for installing the pRRU3901 based on the construction blueprint and the
space requirements.
Step 2 If the diameter of the pole ranges from 30 mm to 70 mm, use the delivered V clamp, installation
plate, and bolts to install the pRRU3901 on the pole. Lead the M6x80 bolt through the plate,
and tighten the bolt to a torque of 5 N•m, as shown in
Issue 08 (2015-01-15)
NOTE
For pRRU3901 installation space requirements, see Space Requirements.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing a pRRU3901
Figure
6-15.
66