Panasonic KX-TD500 Programming Manual page 36
Digital super hybrid system
Hide thumbs
Also See for KX-TD500:
- System reference manual (1574 pages) ,
- User manual (554 pages) ,
- Features manual (398 pages)
Table of Contents
Advertisement
Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
36
Type
CO
1.
CO
2.
EXT
3.
Qsig – Master
4.
Qsig – Slave
Specifies the type of each PRI port on a PRI port basis.
Notes
• When you change the programming data, the status of the
card must be made OUS (Out-of-Service), and then INS (In-
Service).
• The type of PRI port can be assigned per PRI23/PRI30 card.
• This setting is valid when the LPR software version of the
PRI23/PRI30 card is "Q361AB"/"Q341AC" or later
respectively.
• 2.1 ISDN Features (F/G)
– Integrated Services Digital Network (ISDN)
– Integrated Services Digital Network (ISDN) Extension
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 4.7 ISDN Extension Line (P/G)
DN
Blank
3-4 digits consisting of 0-9 or X
Specifies the DN (Directory Number) for the PRI port.
(Assignable only when "EXT" is specified in "Type" assignment.)
Notes
• "X" can be used as a wild card character which substitutes
any digit in its position. The last one or two digits of DN may
be "X."
• This setting is valid when the LPR software version of the
PRI23/PRI30 card is "Q361AB"/"Q341AC" or later
respectively.
• 2.3 Numbering Plan (P/G)
Programming Guide
- Quick Links:
- Configuration
- Configuration
Hide quick links:
Advertisement
Table of Contents
