VC70N_QRG_72-164687-01_English_October 16.fm Page 6 Tuesday, October 16, 2012 2:29 PM
6
U Mount Installation
The vehicle computer and bracket must be firmly secured to a
NOTE
surface that can support the vehicle computer's weight.
Assemble the U mount bracket onto the vehicle computer as shown
below.
Torque the M12x40mm hex head screws to 350 ± 10% kgf-cm (300 ±
10% lbs-in).
Installing the VC70 on a Forklift
A qualified engineer must perform the installation in a
CAUTION
vehicle. Improper installation can injure the operator or
damage the vehicle and/or VC70.
Follow the instructions below to properly install the VC70 on a forklift.
• Determine the best location for mounting the vehicle computer taking
into consideration the driver's field of view and ease of accessing the
vehicle computer.
• Install the appropriate mounting hardware. The VC70 ships with four
No. 8 Allen head screws (M10x50mm) for securing the mounting
VC70 Vehicle Computer
U Mount
Hex Head Screw
Lock Washer
Flat Washer
Friction Pad
Friction Pad
Mounting Area