Installation Of Agps Board (Prevention Of Unexpected Start, +Q950); What This Chapter Contains; Prevention Of Unexpected Start (+Q950); Installation Of The Agps Board - ABB ACS800 Hardware Manual
Hide thumbs
Also See for ACS800:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
Installation of AGPS board (Prevention of
Unexpected Start, +Q950)
What this chapter contains
This chapter describes the electrical installation of the optional Prevention of
Unexpected Start function (+Q950) of the drive.
Prevention of Unexpected Start (+Q950)
The optional Prevention of Unexpected Start function includes an AGPS board which
is connected to the drive and an external power supply. See also chapter
the electrical
Installation of the AGPS board
WARNING! Dangerous voltages can be present on the AGPS board even when the
115...230 V supply is switched off. Follow the
this manual and the instruction in this chapter when working on the AGPS board.
Make sure that the drive is disconnected from the mains (input power) and the
115...230 V source for the AGPS board is switched off during installation and
maintenance. If the drive is already connected to the mains, wait for 5 min after
disconnecting mains power.
See
• page
• page
• page
• section
Note: Maximum cable length between AGPS terminal block X2 and the drive
terminal block is restricted to 10 metres.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
installation, page 50.
24
for location of terminal block X41 of the drive
73
for the circuit diagram
74
for the dimensions of the AGPS board
AGPS-11C
in chapter
Installation of AGPS board (Prevention of Unexpected Start, +Q950)
Safety instructions
Technical data
for the technical data of the board.
71
Planning
on the first pages of
Advertisement
Table of Contents
