Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Netum NT-C6
- Page 1 WIRELESS INVENTORY HANDHELD USER’S Manual...
-
Page 2: Table Of Contents
CONTENTS CHAPTER I BRIEFING ......................1 1.1 Package List ........................1 1.2 Safety Cautions ........................1 1.3 Battery Charging ....................... 1 1.4 Battery Installation ......................2 1.5 Accessories ......................... 3 CHAPER II FUNCTIONS & OPERATIONS................4 2.1 Overview ..........................4 2.2 Basic Operation ......................... -
Page 3: Chapter I Briefing
User’s Manual for Handheld Page 1 of 27 CHAPTER I BRIEFING 1.1 Package List 1．Handheld 1 ; 2．USB mini-receiver 3．Mini-USB cable 4．Charger 1.2 Safety Cautions Please read the following concise rules. Violation of these rules may cause danger or infringement of the law. Boot in safety: Don’t switch on the handheld when wireless device is forbidden or is to cause interference and danger. -
Page 4: Battery Installation
User’s Manual for Handheld Page 2 of 27 new one; (4) Do not impact， shock or throw the battery violently, or it may cause leakage, damage or even explosion. 1.4 Battery Installation 1.4.1 Remove battery cover. Turn the Handheld to its back, put some stress on the battery cover, then push it downward as following picture shows: 1.4.2 Load battery. -
Page 5: Accessories
User’s Manual for Handheld Page 3 of 27 1.4.3 Refit battery cover. Put some stress on the cover to fit it back to its place, then push upward as the following picture shows: 1.5 Accessories receiver Wrist strap battery cable charger... -
Page 6: Chaper Ii Functions & Operations
User’s Manual for Handheld Page 4 of 27 CHAPER II FUNCTIONS & OPERATIONS 2.1 Overview 2.2 Basic Operation 2.2.1 Bootup Make sure the battery is properly loaded and fully charged. Long press the power button until the screen lights up. 2.2.2 Shutdown Hold down the power button till the screen turns off. -
Page 7: Main Functions
User’s Manual for Handheld Page 5 of 27 2.3 Main Functions 2.3.1 Receiving/Shipping Please refer to the following “Cycle Count” instruction. Operations are the same. 2.3.2 Cycle Count a. In the main menu, select “Cycle Count” or press the number key 3 to enter the operation page;... - Page 8 User’s Manual for Handheld Page 6 of 27 Transmission Setting: define the separator and/or terminator of the transmission data (none, space, tab, CR, LF, comma and semicolon available) and specify fields to be uploaded. Note: use up or down arrow key to move among options and OK to confirm selection. Then use left or right arrow keys to change status and OK to confirm.
-
Page 9: Wireless Scan
User’s Manual for Handheld Page 7 of 27 UNK item: when it is enabled, the user can decide whether to process the unknown items or not (new item or item missing in the item file). Otherwise, unknown item is forbidden. 2.3.3 Wireless Scan Establish communication between the Handheld and the Receiver. -
Page 10: Search
User’s Manual for Handheld Page 8 of 27 button to start reading barcodes. When the signal is good, the scanned data will be uploaded right away to the computer and show up at where the cursor locates. With no signal or weak signal, the data will be automatically saved in the handheld and uploaded to the computer when the signal restores. -
Page 11: Advance
User’s Manual for Handheld Page 9 of 27 unique mode: one receiver to a sole handheld connection： select one mode and press OK to start pairing, then plug the receiver into the usb port of the computer. If pairing failed, try again. 2.3.8 Advance clear memory：1. -
Page 12: Chaper Iii Pc Application
User’s Manual for Handheld Page 10 of 27 CHAPER III PC APPLICATION The major function of the PC application lies in two: 1. To download a program to refresh the handheld in case of a new version or a breakdown; 2. -
Page 13: Operation Description
User’s Manual for Handheld Page 11 of 27 Figure 3-4 This may take a few minutes. After completion, go back to install the application again as shown in figure 3-1 & 3-2 3.2 Operation Description 3.2.1 Update Program In the Handheld, select “Advance” “update” and press OK into the updating page: Figure 3-5 Open the PC application, expand the DOWNLOAD drop-down menu and select “Download Program”:... -
Page 14: Download Item File
User’s Manual for Handheld Page 12 of 27 Figure 3-7 Now a hint of “downloading” is shown on the Handheld. When the download completes, the handheld will reboot automatically. A new program is updated. Meanwhile the PC application also gives a notification of completion. Figure 3-8 3.2.2 Download Item File Simply speaking, it is a process to import the item file into the PC application and then... - Page 15 User’s Manual for Handheld Page 13 of 27 Figure 3-9 Configuration Instruction： 1. File Type: Item List 2. file Format: MS Excel, CSV and TXT format available. Select one according to your item file. 3. Separator: choose one from comma, semicolon, TAB and fix-length or input one according to your item file, but leave it as it is for an Excel format file.
- Page 16 User’s Manual for Handheld Page 14 of 27 EXAMPLE： Import an EXCEL file Step 1: import format configuration Suppose you have an item file named inventory.xls. There are 9 columns in it, but we need only 7 fields as barcode, item name, unit, stock, cost, price and specification. The import format is set as below: Column 1 Figure 3-10...
- Page 17 User’s Manual for Handheld Page 15 of 27 Figure 3-11 Select a work sheet: Figure 3-12...
- Page 18 User’s Manual for Handheld Page 16 of 27 Confirm to start the import. When “import success!” appears, the item file has been imported into the database of the PC application. Figure 3-13 Step 3: item search Click DOWNLOAD and select “Item Search” to confirm and view commodity details imported in the PC application:...
- Page 19 User’s Manual for Handheld Page 17 of 27 Step 4: download item file to the handheld To start the download operation, select “Transmit Item List to handheld” from the drop-down menu of DOWNLOAD. If download has been successfully proceeding, the PC application gives a notification of success and the handheld screen refreshes automatically.
- Page 20 User’s Manual for Handheld Page 18 of 27 2. format is set as below： The rest steps please refer to the first example “import an excel file”. Import a fix-length TXT file: The first column is barcode, the second item name, the third UOM, the fourth price, the fifth cost and the sixth stock.
-
Page 21: Data Upload
User’s Manual for Handheld Page 19 of 27 format is set as below： The rest steps please refer to the first example “import an excel file”. 3.2.3 Data Upload Step 1: connect the handheld and the computer with the USB cable; Step 2: in the main menu of the handheld, enter any of the options you are going to process (wireless scanner / receiving / shipping / Cycle Count). -
Page 22: Data Query
User’s Manual for Handheld Page 20 of 27 3.2.4 Data Query When all data is collected and uploaded to the PC application, you may carry out an enquiry, export and cleanup of data according to different conditions. As the query condition set，click the QUERY button to view the result: 3.2.5 Export File You could export and save query results in various file formats (eg. - Page 23 User’s Manual for Handheld Page 21 of 27 Configuration instruction: 1.file type：export data； 2.fiel format：Excel，TXT，CSV，XML, clipboard, cursor, DRUGXML, WPS, ET, DBF available; 3.contain symbolic：add a quotation mark to each field（valid only for TXT file）; 4.number field except：no quotation mark to numbers even though the MARK option is selected;...
- Page 24 User’s Manual for Handheld Page 22 of 27 EXAMPLE: Step 1：configure the format of the file to be exported Click SAVE and CLOSE to shut the dialog box then click EXPORT again Step 2: specify a path for saving the exported file: Enter a file name (eg.
- Page 25 User’s Manual for Handheld Page 23 of 27 Step 3：Open the exported file: To get an exported TXT file like this, the format should be configured as below:...
-
Page 26: Delete Data
User’s Manual for Handheld Page 24 of 27 To get an exported fix-length TXT file like this, the format should be configured as below: 3.2.6 Delete Data In the "QUERY&EXPORT" interface, click "Delete" and choose YES in the pop up dialog box. -
Page 27: Warranty
User’s Manual for Handheld Page 25 of 27 WARRANTY The Wireless Handheld is warranted for a period of twelve (12) months from the date of purchase. Terms & Conditions: A. Warranty service is only available for products purchased from original manufacturer or its authorized dealers B.