Download Print this page

D-Link DGE-530T Quick Install Manual page 4

Hide thumbs Also See for DGE-530T:

Installation

Once the installation is complete, click OK to finish.

Shut down your computer. Go to Start > Shut Down > select Shut

Down and click OK.

Once your computer is turned off, remove the power cable from

the computer. Open the case and insert the D-Link adapter into an

available PCI slot.

Note: Write down the serial number and hardware revision (e.g. B1)

before installing the adapter. If you contact technical support, you will

need this information.

Replace the case, plug in the power cable, and power on your

computer.

D-Link DGE-530T Quick Install Guide

Table of Contents