Table of Contents
Advertisement
5 Surveillance Mode Configuration
SNTP State
SNTP Poll Interval (30-99999)
Click the Apply button to implement changes made.
The fields that can be configured for SNTP Server Settings are described below:
Parameter
SNTP First Server
SNTP Second Server
Click the Apply button to add the SNTP server to the configuration.
Surveillance Settings
The Surveillance Settings page allows user to configure the settings for the Surveillance VLAN. This is a
VLAN dedicated for IP-Camera (IPC) and Network Video Recorders (NVR), and also can be used to manage
surveillance devices on the network.
The fields that can be configured for the Surveillance Settings are described below:
Parameter
VLAN ID (2-4094)
Click the Apply button to implement changes made.
The fields that can be configured for the IP Settings are described below:
Specifies to enable or disable the SNTP state.
Specifies the poll interval. The range is between 30 and 99999. By
default, the value is 30 seconds.
Description
Select to enter the IPv4 or IPv6 address for SNTP first server.
Select to enter the IPv4 or IPv6 address for SNTP second server.
Figure 5.14 – Surveillance Mode > Surveillance Settings
Description
Specifies a VLAN ID for the surveillance VLAN in the range between 2
and 4094.
128
D-Link Smart Managed Switch User Manual
- Quick Links:
- Using Web-Based Management
- Management Options
Hide quick links:
Advertisement
Table of Contents
