Bosch CCS 1000 D Operation Manual page 35
Digital discussion system
Hide thumbs
Also See for CCS 1000 D:
- Operation manual (70 pages) ,
- Quick start manual (8 pages) ,
- Release notes (8 pages)
Table of Contents
Advertisement
Digital Discussion System
–
–
–
Camera
Click the Camera button which opens the Camera settings page.
–
–
–
–
–
Notice!
Ensure that the Bosch Onvif Camera has firmware 5.80 or higher.
Network
Click the Network button which opens the Network settings page.
Here the network settings can be edited and set:
–
Recorder (CCSD-CURD only)
Click the Recorder button which opens the Recorder settings page.
The following recorder settings are available:
–
–
Bosch Security Systems B.V.
Line output for microphones (CCSD-CURD only): Sets the level of the analogue audio
outputs 3‑6 of the Control Unit:
–
Select 3, 4, 5 or 6 to enable selectable microphones for individual recording.
Acoustic Feedback Suppression:
–
Attenuate headphone when speaking: Attenuates the headphone volume of the
Discussion Devices 18 dB, when selected and the microphone is on.
AFS: Here the AFS function can be switched on or off.
Overview Camera: Defines the camera used as the overview camera.
Preposition: Defines the preposition used for the overview.
Switcher: Enter the IP address of the HD‑SDI video switcher used.
Remove: Click the recycle bin icon to remove the selected camera.
–
Note: Only a disconnected camera can be removed.
Camera: Here all connected cameras are listed, including: Serial Number, Software
version, camera Type and to which video switcher Input it is connected.
–
The camera Serial Number is used as a link to the camera configuration web pages.
Note: Only possible if your PC configuration device is wired connected to the
Control Unit.
Hostname: Enter the Link‑local web address of the Control Unit:
–
Name (CCS1000D) or
–
URL (CCS1000D.local) in case the Control Unit is not connected to a cooperate
network).
Bit rate: Select the recording audio quality (from 64 kbps (lowest) up to 256 kbps
(highest)).
Recording source: Select which audio source must be recorded:
–
Floor only: The audio of the floor discussion language is recorded.
–
Floor and output 3, 4, 5, 6: The audio of the floor discussion language and audio
outputs 3‑6 signals are both/mixed recorded.
Operation manual
Configuration | en
35
2014.09 | V1.0 |
Hide quick links:
Advertisement
Table of Contents
