Table of Contents
Advertisement
10. FCC Approval
This Module complies with parts 22, 24, 27 of the FCC rules.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This module should be installed and operated with minimum distance 20cm
between the radiating element of this device and the user.
This module may not be co-located with any other transmitters or antennas.
To comply with FCC regulations limiting both maximum RF output power and
human exposure to RF radiation, the maximum antenna gain including cable
loss in a mobile-only exposure condition must not exceed the table below.
Band
CDMA(Cellular)
CDMA(PCS)
LTE(B13)
LTE(B4)
The satisfy FCC exterior labeling requirements, the following text must be placed
on the exterior of the end product.
Contains Transmitter module FCC ID: YZP-VL1000
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or codification is made.
Note: If this module is intended for use in a portable device, additional testing
will be required to satisfy RF Exposure, including SAR requirements of FCC Part
2.1093.
Copyright ⓒ. 2014. All Rights Reserved.
Frequency Range
[MHz]
824.70~848.31
1851.25~1908.75
779.50~874.50
1710.70~1754.30
Maximum Antenna
Gain[dBi]
5.50
7.00
5.31
4.29
Advertisement
Table of Contents
