Siemens SIMATIC HMI KP400 Comfort Operating Instructions Manual page 95
Hmi devices
comfort panels
Hide thumbs
Also See for SIMATIC HMI KP400 Comfort:
- Quick install manual (2 pages) ,
- Operating instructions manual (162 pages)
Table of Contents
Advertisement
NOTICE
Activating the screen saver
Display content that is not changed for a long period can remain dimly visible in the
background for a long time. This effect is reversible when you use a screen saver with
moving image. Therefore, activate the screen saver of the type "Standard
(Flying Windows)".
Requirement
The Control Panel is open.
Procedure
1. Open the "Screensaver" dialog using the "ScreenSaver" icon.
①
②
③
④
⑤
2. Enter the number of minutes after which the screen saver is to be activated.
The minimum setting is 1 minute and the maximum setting is 360 minutes. Entering "0"
disables the screen saver.
3. Select the type of screen saver:
– Use the "Standard" option to enable the default screensaver.
– Using the option "Standard with Dim Backlight" you activate the Windows standard
– Use the option "Blank Screen" to activate the disabling of the backlighting of the
4. Using the option "Dim Backlight to" you reduce the backlight to a value between
25% and 90%, without activating a screen saver.
If you enter a value outside the range of 25 to 90%, a message will appear and the value
is reset to 25%.
Comfort Panels
Operating Instructions, 07/2017, A5E36770603-AB
Period of time in minutes before the screen saver is activated
Type of screen saver
Reduced backlighting to a specified value
Allow dimming when deactivating the "Blank Screen" screen saver
Short-term operation lock after deactivating the "Blank Screen" screen saver
screensaver and reduce the backlight to a value between 25% and 90%.
If you enter a value outside the range of 25 to 90%, a message will appear and the
value is reset to 25%.
device.
Commissioning the device
4.3 Parameter assignment for Comfort Panel
95
Hide quick links:
Advertisement
Table of Contents
