MASTERColour CDM-TT
CDM-TT 70W E27
D
CDM-TT
3.46
OEM Catalogue 2009/2010
Type
MASTERColour CDM-TT 70W/942 E27 SLV
MASTERColour CDM-TT 150W/942 E40 SLV
Product Description
High-intensity discharge lamps with a CDM discharge tube inside a
●
SON lamp clear tubular outer bulb
Product Features
Robust lamp giving a pleasant white light and a stable colour over
●
lifetime
Good colour rendering
●
Dimming not recommended because of negative effects on lamp
●
performance (lumen maintenance, colour and life)
Product Benefits
Runs on SON gear so directly replaces equivalent wattage SON
●
lamp for simple upgrade from yellow to white light
Application
City centres, shopping centres and pedestrian areas, residential
●
areas, road lighting
City beautification: decorative lighting and floodlighting
●
Luminaires
In the highly unlikely event of lamp breakage by incorrect use,
●
vandalism or end of life effects, the luminaire housing should be able
to contain heated glass, metal and / or ceramic particles
System
Must be used in combination with a gear and an ignitor
●
Must be used with a SON gear and SON ignitor in accordance with
●
SON IEC standards (ignition pulse between 1.8 kV and 2.5 kV for
70 W)
For optimum lamp performance, the mains voltage may deviate by
●
maximum +6/-8% from the voltage indicated on the type plate
Warm restart time can be up to fifteen minutes. if the lamp does not
●
start (e.g. with T5 ignitors), the installation must be switched off for
fifteen minutes
Recommended gear page 3.170
www.philips.com/OEM
CMax
DMax
LNom
156
32.5
102
211
46
133
ONom
6
8