Info-Center Security-Logfile Enable - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference
Routing
Hide thumbs
Also See for FlexFabric 12500 Series:
- Configuration manual (402 pages) ,
- Command reference manual (157 pages) ,
- Installation manual (152 pages)
Table of Contents
Advertisement
mdc-admin
Parameters
usage: Specifies an alarm threshold. The value must be an integer in the range of 1 to 100.
Usage guidelines
When the size of the security log file reaches the upper limit, the system deletes the oldest logs and then
writes new logs into the security log file. This feature helps avoid security log loss by setting an alarm
threshold for the security log file usage. When the threshold is reached, the system outputs log
information to inform the administrator. The administrator can log in to the device as the security log
administrator, and back up the security log file.
Examples
# Set the alarm threshold for the security log file usage to 90%.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90
Related commands
info-center security-logfile size-quota
info-center security-logfile enable
Use info-center security-logfile enable to enable saving of security logs into the security log file.
Use undo info-center security-logfile enable to restore the default.
Syntax
info-center security-logfile enable
undo info-center security-logfile enable
Default
The saving of security logs into the security log file is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This feature enables the system to output security logs into the security log file buffer, and saves the logs
from the buffer to the security log file at a specific interval.
Examples
# Enable saving security logs into the security log file.
<Sysname> system-view
[Sysname] info-center security-logfile enable
224
Advertisement
Table of Contents
