Related Manuals for Toro 51130T
Summary of Contents for Toro 51130T
- Page 1 Form No. 3408-767 Rev C Power Plex™ 33cm 40V MAX String Trimmer Model No. 51130—Serial No. 317000001 and Up Model No. 51130T—Serial No. 317000001 and Up *3408-767* C Register at www.Toro.com. Original Instructions (EN)
- Page 2 A. Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Model 51130T does not include a battery or a charger. B. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gasses, or dust.
- Page 3 E. Store idle appliances indoors. When not C. Use only the following type and size in use, appliances should be stored indoors battery(ies): Toro battery Model 88525 or in a dry and high or locked-up place, out of 88526. the reach of children.
-
Page 4: Sound Pressure
Sound Pressure This unit has a sound pressure level at the operator’s ear of 83.1 dBA, with an Uncertainty Value (K) of 3 dBA. The sound pressure level was determined according to the procedures outlined in EN ISO 11201. Sound Power This unit has a guaranteed sound power level of 96 dBA, which includes an Uncertainty Value (K) of 1.02 dBA. -
Page 5: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal136-2490 136-2490 1. Double insulated 2. Do not discard. decal136-2482 136-2482 1. - Page 6 decal136-2504 136-2504 1. The battery pack is 3. The battery pack is too charging. warm. 2. The battery pack is fully 4. The battery pack needs to be replaced. charged. decal136-2535 136-2535 1. Warning—keep 2. Thrown object bystanders away from the hazard—keep bystanders machine in all directions.
-
Page 7: Loose Parts
Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. – No parts required Mount the battery charger (optional). – No parts required Unfold the handle. Auxiliary handle Install the auxiliary handle. Guard Mounting the guard to the base of the trimmer. -
Page 8: Unfolding The Handle
Unfolding the Handle No Parts Required Procedure 1. Unfold the handle (A of Figure 2. Press and hold the locking button on the upper shaft, align the locking button with the slotted hole on the lower shaft, and slide the 2 shafts together. Once the slotted hole on the lower shaft is past the locking button, release the locking button, and slide the lower shaft into the upper shaft until the trimmer is at the desired height (B of Figure... -
Page 9: Installing The Auxiliary Handle
Installing the Auxiliary Installing the Guard Handle Parts needed for this procedure: Guard Parts needed for this procedure: Phillips head screw Auxiliary handle Procedure Procedure 1. Remove the 3 Phillips screws that are taped to 1. Line up the groove along the handle with the the guard and slide the guard onto the trimmer groove on the auxiliary handle and slide the base (A of... -
Page 10: Product Overview
Product Overview Specifications Installing the Edge Guard Weights Mass of the machine without 3.2 kg (7.0 lb) Parts needed for this procedure: the battery Mass of the machine with 4.2 kg (9.2 lb) Wire edge guard battery 88525 Mass of the machine with 4.8 kg (10.5 lb) battery 88526 Procedure... -
Page 11: Operation
Stopping the Trimmer Operation To stop the trimmer, release the trigger. Starting the Trimmer Removing the Battery Pack 1. Make sure that the vents on the trimmer are clear of any dust and debris. from the Trimmer Press the battery latch on the machine to release the battery pack and slide the battery pack out of the machine (Figure... -
Page 12: Charging The Battery Pack
Charging the Battery Pack Important: Make sure to read all safety precautions. Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page 10). Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators). -
Page 13: Advancing The Line
Advancing the Line Adjusting the Handle Height Note: The trimmer is equipped with an auto-feed head. 1. Loosen the lower shaft connector (A of Figure 1. With the trimmer running, release the switch 13). trigger. 2. Slide the telescoping shaft to your desired 2. -
Page 14: Adjusting The Auxiliary Handle
Adjusting the Auxiliary 1. Press the rotator button, rotate the head 90°, and make sure that it locks into place (A of Handle Figure 16). 2. Stand the trimmer on the wheel and begin 1. Release the auxiliary-handle latch (A of Figure edging (B of Figure... -
Page 15: Maintenance
Replacing the Spool Use only 2 mm (0.080 inch) diameter monofilament string. Use the original manufacturer’s replacement string for best performance (Toro Part No. 88545TE). Important: Using a larger diameter string causes G015662 the motor to overheat and fail. -
Page 16: Preparing The Battery Pack For Recycling
the wound string and the outside edge of the spool. 6. Replace the spool and the spool retainer; refer Replacing the Spool (page 15). Storage Important: Store the tool, battery pack, and charger only in temperatures that are within the appropriate range;... -
Page 17: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Problem Possible Cause Corrective Action The tool does not start. - Page 18 Problem Possible Cause Corrective Action 1 LED indicator is blinking on the battery 1. The battery pack is low voltage. 1. Place the battery pack on the charger. pack. It is difficult to remove the battery pack 1. The battery pack/tool is new or there 1.
- Page 19 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.
- Page 20 – Failure to follow proper maintenance procedures or recommended The Toro GTS Starting Guarantee does not apply when the product is used commercially. fuel procedure Some engines used on Toro Products are warranted by the engine manufacturer.