Vascular Calculations
7-12
Stopping a Measurement Before Completion
To stop a measurement or sequence of measurements and return the cursor
to the currently displayed Calculation menu, press the <
completing the measurement.
To stop a measurement or sequence of measurements and exit the Calcula-
tion package, press the
Viewing the Patient Report
There are two ways of viewing the Patient Report:
While in the calculation package, select Report from the calculation Selection
Menu.
At any time, press the
Changing the Position of a CALC Menu
To change the position of a CALC menu, follow these steps:
Place the cursor on a border of the CALC menu and press <
1.
To move the menu ...
2.
downwards, place the cursor on the bottom border.
upwards, place the cursor on the top border.
to the left, place the cursor on the left border.
to the right, place the cursor on the right border.
diagonally, place the cursor on the corners of the menu.
ACUSON Cypress™ Operator's Manual
key before completing the measurement.
CALC
function key and click the Reports tab.
PATIENT
> key before
ESC
>.
ENTER