Table of Contents
Advertisement
Installation & Setup Guide
3. Intelligent Lighting Encoders and Screen Selection Buttons
The encoders and buttons found in this section of the desk
provide special controls for intelligent lighting fixtures and
quick access to main screen displays.
The rotary four encoders provide navigation of the PaletteOS
software and control of channel attributes. The encoders are
context sensitive to allow appropriate control of attributes
such as one percent, one DMX512 step, one gobo, one second
of time, etc.
The buttons function as follows:
[POS]
• Use Position Quick Selection button to select position con-
trol on the four rotary encoders, or for recording Position
Preset Focus palettes.
[GOBO]
• Use Gobo Quick Selection button to select Gobo control parameters on the four rotary encoders, or for recording
Gobo Preset Focus palettes. Press again to bank the four encoders to other Gobo wheels.
[SPECL]
• Use Special Quick Selection button to select special control parameters on the four rotary encoders or for record-
ing palettes that use special attributes. Special includes functions such as Lamp On/Off Reset, fixture timing,
strobe etc. Press again to bank the four encoders for more Special controls.
[HIGHLIGHT]
• Use Highlight Quick Selection button to clear all attributes to defaults (except Pan and Tilt) to aid in positioning
selected channels when a cue is active. Use with [SHIFT] to trigger Low Light which takes all other fixtures in the
Cue List to 20%, leaving the selected fixture at its recorded intensity allowing you to adjust any other parameter.
[COLOR]
• Use Color Quick Selection button to select position control on the four rotary encoders, or for recording Color pal-
ettes.
[LENS]
• Use Lens Quick Selection button to select Lens control parameters on the four rotary encoders. Lens includes func-
tions such as Zoom, Edge, Frost, Shutter Blade Control, etc.
[FX]
• Use Effects Quick Selection button to add intensity FXs or select Effects control parameters on the four rotary
encoders.
[PREV/NEXT]
• Use [PREV] and [NEXT] buttons to loop through all channels with more than one attribute. The [PREV] and
[NEXT] buttons above the numeric keypad loop through all channels.
[LIVE]
• The [LIVE] button switches the Screen display to view the live screen. The live screen shows the current level of
channels and the active Cue List.
2 2
Controls
Light Palette Lighting Control Console
Screen Selection
Buttons
Encoder
Fx
List
Advertisement
Table of Contents
