21.3 GOT Side Settings
21.3.1
Basics of interface selection
This section explains basic knowledge of the multi-channel function.
A general flow of operation from system selection for the multi-channel function to drawing is explained in 21.3.2 to 21.3.6.
It is recommended to refer to 21.3.2 to 21.3.6 when making necessary settings using the multi-channel function for the first
time.
■1. Multi-channel function specifications
How the units are installed and the multi-channel function specifications are described below.
(1) Image drawing of unit installation
3rd stage
2nd stage
1st stage
(Example: In the case of the GT27)
21 - 6
21.3 GOT Side Settings
Extension interface
Standard interface 4
(Ethernet interface built in the GOT)
Standard interface 1
(RS-232 interface built in the GOT)
Standard interface 3
(RS-422/485 interface built in the GOT)
Standard interface 2
(USB interface built in the GOT)