Table of Contents
Advertisement
De-registration
Perform de-registration to delete the ID of the CS/repeater that the repeater is registered to.
WARNING
When installing or testing a product with an external AC adaptor, the AC adaptor should be plugged
into a wall outlet or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor may cause it to become disconnected.
1.
Ensure that the repeater is turned off by disconnecting the AC adaptor.
2.
While pressing and holding down the PROGRAM button, turn on the repeater by connecting the AC
adaptor.
3.
Continue to hold down the PROGRAM button for 10 seconds.
When the STATUS LED turns red, de-registration is complete.
Note
If the PROGRAM button is released after 5 seconds but before 10 seconds have elapsed, while the
STATUS LED is flashing quickly, the repeater will enter Site Survey mode.
4.
Release the PROGRAM button to reset the repeater.
The repeater automatically enters Easy Registration mode. For details about the easy registration
procedure, refer to "Easy Registration".
Document Version 2010-06
PROGRAM Button
Hook
Press plug firmly.
To AC Outlet
2 Registering the Repeater
Installation Manual
13
- Quick Links:
- Compatible Devices
- Easy Registration
Hide quick links:
Advertisement
Table of Contents
