Connecting An Mp40 Module And An Lp40 Module; Figure 3.12 Extension Cables - Samsung OfficeServ 7400 Installation Manual
Hide thumbs
Also See for OfficeServ 7400:
- Technical manual (381 pages) ,
- General description manual (112 pages) ,
- Installation manual (87 pages)
Table of Contents
Advertisement
5) Follow steps 3 and 4 to mount the LP40 module into a slot in the OfficeServ 7400 ex-
pansion chassis.
3.2.4 Connecting an MP40 Module and an LP40 Module
If the OfficeServ 7400 system consists of a basic chassis and an expansion chassis, connect
the MP40 module to the LP40 module in the expansion chassis using extension cables to
transmit and receive signals between the control modules.
1) Three extension cables are needed to connect the MP40 module to the LP40 module.
If you have two expansion chassis, six cables are required.
2) With an extension cable, connect the 'LINK21' port of the MP40 module in the basic
chassis and the 'LINK1' port of the LP40 module in the expansion chassis.
3) With a second extension cable, connect the 'LINK22' port of the MP40 module and
the 'LINK2' port of the LP40 module.
© Samsung Business Communications
Figure 3.12 Extension Cables
OfficeServ 7400 Installation Guide
3-9
Advertisement
Table of Contents
