Connecting
This section explains how to connect to the system by connection patterns.
The illustrations used here are for DM-D110/DP-110, but you can still use them as your reference for DM-
D210/DP-210.
CAUTION
USB (Self Powered)
DM-D110
USB cable
DM-D210
RS-232 cable
DP-110
DM-D connector
DP-210
Power supply connector
Extension power cable connec-
tor
Computer interface connector
Printer interface connector
Jumper (JP)
When attaching or removing the cables, make sure you turn off the power to the customer dis-
play and the system.
When connecting or removing the AC adapter to the DC cable connector, make sure that the
AC adapter's power cord is unplugged from the outlet.
When connecting or removing the DC cable from the AC adapter, make sure you hold the con-
nector part. If you pull the cable part, you may damage the cable.
Ferrite core
Computer
AC adapter
Power cord
DM-D110/DM-D210
RS-232 cable
USB cable
DP-110/DP-210
Remove the cap
Attach the ferrite core
Connect to the computer
Remove the cap
Connect to the DM-D connector of DP-110/DP-210
Connect the RS-232 cable of DM-D110/DM-D210
Connect the AC adapter
Not used
Not used
Not used
Not setting
Chapter 2 Setup
2
63