UNIVERGE SV8100
1. Remove the screw from the front of the IP1WW-2PGDAD.
2. Using a screwdriver, break out the plastic piece covering the cable hole.
3.
System Hardware Manual
CHUYÊN CUNG CẤP TỔNG ĐÀI NEC
Figure 6-2 Remove Cover from IP1WW-2PGDAD
Figure 6-3 Remove Plastic Cover from Cable Hole
Set the S3 - S6 jumpers to the proper settings for the function to be used (refer
to
Table 6-2 IP1WW-2PGDAD S3 - S6 Jumper Settings on page
http//vietpro.com.vn
6-4).
6-3