Table of Contents
Advertisement
For internal use only
1 Introduction
HiPath HG 1500 supports the standard functions of ISDN (IP/IPX) routers together
with the additional functionality of a voice gateway (H.323). A virtual CAPI interface
(VCAPI) and a TAPI interface (CSTA) are also provided. The system also facilitates
PC-supported telephony (CTI) and HiPath HG 1500 administration via a LAN PC.
Caution
All safety instructions for service and technical personnel given in the "Important
Information" section of the Hicom 150 E Office/Hicom 150 H Service Manual are
also applicable to HiPath HG 1500 and must be observed.
Only authorized staff should work on the system.
Note
Note that when configuring voice applications, only S30810-Q2930-X (HXGM) and
S30810-Q2931-X (HXGS) boards may be used.
1.1 HiPath HG 1500
HiPath HG 1500 creates a bridge between the LAN and the ISDN network via an in-
tegrated board.
It is suitable for:
Hicom 150 E Office as of Version 2.2 or Hicom 150 H OfficePoint/ OfficeCom/ Of-
ficePro models
The following implementation scenarios are possible:
Voice gateway between LAN (H.323) and standard telephones (e.g. Netmeet-
ing),
Telephoning from the PC (voice over IP) with Optiset features available at the PC
or via the Xpress client,
WAN connections via the ISDN network, including PPP Multilink,
Remote access from within company LANs (provided via analog V34, GSM V110
and ISDN),
Internet access (PPP router, NAT),
vCAPI for client PCs including fax services and CTI,
SNMP (e.g., statistics and error signaling).
A31003-K5020-S100-4-7620
Service Manual
lan2de.c01
Introduction
HiPath HG 1500
1-1
Hide quick links:
Advertisement
Table of Contents
