Advertisement
Available languages
Available languages
Using the appliance
Note: The shaver cannot be used directly from the mains.
1
Remove the protection cap.
2
Press the on/off button to switch on the
shaver (Fig. 6).
3
Move the shaving heads over your skin. Make
both straight and circular movements (Fig. 7).
Note: Shave on a dry face only. Do not use the shaver
in combination with gel, foam or water.
Note: Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
4
Press the on/off button to switch off the shaver.
5
Clean the shaver after every shave (see
chapter 'Cleaning and maintenance').
6
Put the protection cap on the shaver
to prevent damage and to avoid dirt
accumulation in the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap
covers the release button.
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
Clean the shaver after every shave to guarantee
better shaving performance. For the best cleaning
result, we advise you to use Philips Cleaning Spray
(HQ110). Ask your Philips dealer for information.
Note: Philips Shaving Head Cleaning Spray (HQ110)
may not be available in all countries. Contact the
Consumer Care Centre in your country about the
availability of this accessory.
After every shave: shaving unit and hair
chamber
1
Switch off the shaver, remove the adapter from
the wall socket and pull the micro USB plug out
of the shaver.
2
Clean the top of the appliance with the
cleaning brush supplied (Fig. 9).
3
Press the release button (1) and pull the
shaving unit in a straight upward movement
off the shaver (2). (Fig. 10)
4
Clean the inside of the shaving unit with the
cleaning brush (Fig. 11).
5
Clean the hair chamber with the cleaning
brush (Fig. 12).
6
Put the shaving unit back onto the
shaver (Fig. 13).
Every two months: shaving heads
Note: Do not use cleaning agents or alcohol to clean
the shaving heads. Only use Philips Cleaning Spray
(HQ110).
1
Switch off the shaver, remove the adapter
from the wall socket and pull the small plug
out of the shaver.
2
Press the release button (1) and pull the
shaving unit in a straight upward movement
off the shaver (2) (Fig. 10).
3
Turn the orange wheel anticlockwise (1) and
remove the retaining frame (2) (Fig. 14).
4
Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard (Fig. 15).
Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
5
Remove the guard from the cutter (Fig. 16).
6
Clean the cutter with the short-bristled side
of the cleaning brush. Brush carefully in the
direction of the arrows (Fig. 17).
7
Clean the guard with the long-bristled side of
the cleaning brush (Fig. 18).
8
Put the cutter back into the guard after
cleaning (Fig. 19).
9
Put the shaving heads back into the shaving
unit (Fig. 20).
10
Put the retaining frame back into the shaving
unit (1) and turn the orange wheel clockwise
(2) (Fig. 21).
11
Put the shaving unit back onto the
shaver (Fig. 13).
storage
Keep the appliance dry.
Use and store the appliance at a temperature
between 5°C and 35°C.
1
Switch off the shaver.
2
Put the protection cap on the shaver after
use to prevent damage and to avoid dirt
accumulation in the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap
covers the release button.
Replacement
Replace the shaving heads every two years for
optimal shaving results.
Replace damaged or worn shaving heads with
Philips shaving heads only (HQ4+ for China or
HQ56 for the rest of the world).
For instructions on how to remove the shaving
heads, see chapter 'Cleaning and maintenance',
section 'Every two months: shaving heads'.
Ordering accessories
To purchase accessories for this appliance, please
visit our online shop at www.shop.philips.
com/service. If the online shop is not available in
your country, go to your Philips dealer or a Philips
service centre. If you have any difficulties obtaining
accessories for your appliance, please contact the
Philips Consumer Care Centre in your country. You
find its contact details in the worldwide guarantee
leaflet.
To retain the top performance of your shaver,
make sure you clean it regularly and replace its
shaving heads at the recommended time.
shaving heads
-
We advise you to replace your shaving heads
every two years. Always replace them with
Philips shaving heads only (HQ4 for China or
HQ56 for the rest of the world) (Fig. 22).
Cleaning
-
Use Philips Cleaning Spray (HQ110) to clean
the shaving heads thoroughly.
Environment
-
Do not throw away the appliance with the
normal household waste at the end of its life,
but hand it in at an official collection point for
recycling. By doing this, you help to preserve
the environment (Fig. 23).
-
The built-in rechargeable battery contains
substances that may pollute the environment.
Remove the battery before you discard and hand
in the appliance at an official collection point.
Dispose of the battery at an official collection
point for batteries. If you have trouble removing
the battery, you can also take the appliance to a
Philips service centre. The staff of this centre will
remove the battery for you and will dispose of it
in an environmentally safe way (Fig. 24).
Removing the rechargeable battery
Only remove the rechargeable battery when
you discard the shaver. Make sure the battery
is completely empty when you remove it.
1
Remove the adapter from the wall socket and
pull the micro USB plug out of the shaver.
2
Let the shaver run until it stops and undo the
screw at the back of the shaver (Fig. 25).
3
Remove the back panel of the shaver with a
screwdriver.
4
Remove the rechargeable battery.
Do not connect the shaver to the mains again
after you have removed the battery.
guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com/support or contact the
Philips Consumer Care Centre in your country.
You find its phone number in the worldwide
guarantee leaflet. If there is no Consumer Care
Centre in your country, go to your local Philips dealer.
guarantee restrictions
The shaving heads (cutters and guards) are
not covered by the terms of the international
guarantee because they are subject to wear.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the appliance. If
you are unable to solve the problem with the
information below, visit www.philips.com/
support for a list of frequently asked questions or
contact the Consumer Care Centre in your country.
Problem
Possible cause
Solution
The shaver
The shaving
Clean the shaving
does not
heads are dirty.
heads thoroughly
shave as
You have not
before you continue
well as it
cleaned the
shaving. See chapter
used to.
shaver well
'Cleaning and mainte-
enough or you
nance'.
have not cleaned
it for a long time.
Long hairs ob-
Clean the cutters and
struct the shav-
guards with the clean-
ing heads.
ing brush supplied. See
chapter 'Cleaning and
maintenance', section
'Every two months:
shaving heads'.
Advertisement
