Siemens sitrans PROBE LU Instruction Manual page 50
2-wire loop powered ultrasonic transmitter for level, volume and flow monitoring of liquids
Hide thumbs
Also See for sitrans PROBE LU:
- Quick start manual (185 pages) ,
- Instruction manual (130 pages) ,
- Operating instructions manual (117 pages)
Table of Contents
Advertisement
P342 Power-On Resets
The number of times power has been applied since the date of manufacture.
Values (view only)
Related
This parameter is updated every time the instrument is reset or is powered up.
P343 Internal Temperature
WARNING: Internal temperature must not exceed 80
Displays (in degrees C) either the current temperature on the circuit board, or the
maximum or minimum temperature recorded by the internal sensor. The high and low
values are maintained over a power cycle.
Primary Index
Value (view only)
Secondary Index
1.
Select P343.
2.
The primary reading displays a temperature, and the secondary index number is
visible in the auxiliary reading field.
3.
Press DISPLAY
4.
Key in the index number required, and press ENTER
5.
The temperature value associated with the new secondary index appears.
6.
Press DISPLAY
desired parameter.
Page 44
SITRANS Probe LU – INSTRUCTION MANUAL
Display
Default:
P341 RUN Time
P343
o
Range
–50
Current temperature
1
*
Maximum temperature
2
Minimum temperature
3
twice to focus control on the secondary index.
twice and use the ARROW keys or enter the value for the next
0.0 to 99999
0
o
C (176
o
C to 150
C
.
o
F).
7ML19985HT01
- Quick Links:
- Programming
- Programming
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
