Table of Contents
Advertisement
(4)
Removal of the Paper Take-Up Clutch Gear
1. Remove the Fusing Unit.
☞ E-7
2. Remove the Power Unit.
☞ D-14
3. Remove the Paper Take-Up Upper Guide Assy.
☞ D-24
4980D074AA
4980D057AA
4136D016AB
4136D017AC
4. Disconnect one connector and remove the Cool-
ing Fan Motor 2.
5. Disconnect one connector of the Main Motor.
☞ D-24
6. Remove the Paper Lifting Plate Assy.
7. Remove two springs.
8. Disconnect one connector and one flat cable
from the Controller/Mechanical Control Board.
NOTE
• Use utmost care not to snap off the flat cable.
9. Remove the Top Cover.
10. Remove four screws.
11. Remove the PH Base Plate Assy.
12. Disconnect one connector of the Paper Take-Up
Solenoid.
13. Remove two screws.
14. Remove the Left Frame.
D-27
Advertisement
Chapters
Table of Contents
Troubleshooting
