Adjustment Instruction - LG DM2780D Service Manual
Cinema 3d tv, chassis : ld93k
Hide thumbs
Also See for DM2780D:
- Owner's manual (102 pages) ,
- Owner's manual (100 pages) ,
- Owner's manual (102 pages)
Advertisement
1. Application
This document is applied to LD93K chassis CINEMA 3D TV
which is manufactured in TV (or Monitor) Factory or is
produced on the basis of this data.
2. Designation
2.1 The adjustment is according to the order which is
designated and which must be followed, according to the
plan which can be changed only on agreeing.
2.2. Power Adjustment: Free Voltage
2.3. Magnetic Field Condition: Nil.
2.4. Input signal Unit: Product Specification Standard
2.5. Reserve after operation: Above 5 Minutes (Heat Run)
Temperature : at 25°C ± 5°C
Relative humidity : 65 ±10%
Input voltage : 220V, 60Hz
2.6. Adjustment equipment: Color Analyzer (CA-210 or CA-
110), Pattern Generator (MSPG-925L or Equivalent),
DDC Adjustment Jig equipment, SVC remote controller
2.7. Don't push The "IN STOP KEY" after completing the
function inspection.
3. Tool Option
4. Main PCB check process
• APC - After Manual-Insult, executing APC
4.1 Download
1. Execute ISP program "Mstar ISP Utility" and then click
"Config" tab.
2. Set as below, and then click "Auto Detect" and check "OK"
(2)
OK
Copyright ©2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
ADJUSTMENT INSTRUCTION
(1)
(3)
Please Check the Speed :
To use speed between
from 200KHz to 400KHz
message.
If display "Error", Check connect computer, jig, and set.
3. Click "Connect" tab.
If display "Can't ", Check connect computer, jig, and set.
4. Click "Read" tab, and then load download file(XXXX.bin)
by clicking "Read"
(4)
filexxx.bin
5. Click "Auto" tab and set as below
6. Click "Run".
7. After downloading, check "OK" message.
(5)
filexxx.bin
- 12 -
(6)
(8) ..........OK
(7)
LGE Internal Use Only
Hide quick links:
Advertisement
