Table of Contents
Advertisement
Liability
All data in this program is based - where possible - on
manufacturer and importer details. Bosch does not
accept liability for the correctness and completeness of
software and data; liability for damage caused by faulty
software and data is ruled out. Whatever the event,
Bosch liability is restricted to the amount for which the
customer actually pays for this product. This disclaimer
of liability does not apply to damages caused by intent
or gross negligence on the part of Bosch.
Warranty
Any use of non-approved hardware and software will
result in a modification to our product and thus to
exclusion of any liability and warranty, even if the
hardware or software has in the meantime been
removed or deleted.
No changes may be made to our products. Our
products may only be used in combination with original
accessories and original service parts. Failing to do so,
will render null and void all warranty claims.
This product may only be operated using Bosch
approved operating systems. If the product is operated
using an operating system other than the approved one,
then our warranty obligation pursuant to our supply
conditions will be rendered null and void. Furthermore,
we will not be held liable for damage and consequential
damage incurred through the use of a non-approved
operating system.
2.3
Obligation of contractor
The contractor is obliged to ensure that all measures
geared towards the prevention of accidents, industrial
diseases, labor-related health risks are taken and
measures towards making the workplace fit for people
to work in are carried out.
Specifications for electrical systems (BGV A3)
Electrical engineering in Germany is subject to
the accident prevention regulations of the trade
association "Electrical Plant and Equipment as under
BGV A3 (previously VBG 4)". In all other countries, the
applicable national regulations acts or decrees are to be
adhered to.
Robert Bosch GmbH
Symbols used | ACS 611 | 35
Basic rules
The contractor is bound to ensure that all electrical
equipment and operating material is set up, modified
and maintained by skilled electricians only or under
the guidance and supervision of a skilled electrician in
accordance with electrical engineering principles.
Furthermore, the contractor must ensure that all
electrical equipment and operating material is operated
in keeping with electrical engineering principles.
If a piece of electrical equipment or operating material
is found to be defective, i.e. it does not or no longer
complies with electrical engineering principles, the
contractor must ensure that the fault is rectified
immediately and, in the event that imminent danger
exists, also ensure that the electrical equipment or the
electrical operating material is not used.
Tests (taking Germany as an example):
R
The contractor must ensure that all electrical
systems and equipment are tested by a qualified
electrician or under the guidance of a qualified
electrician to ensure they are in proper working
order:
$
Before starting for the first time.
$
After modification or repair before starting for the
first time.
$
At given intervals. Set intervals such as to ensure
that faults that can be expected to occur are
determined in good time.
R
The test is to take the electrical engineering
principles relating hereto into account.
R
Upon request of the trade association, a test manual
is to be maintained into which specific entries are
made.
en
|
S P00 D00 002
2013-04-10
Hide quick links:
Advertisement
Table of Contents
