Panasonic KX-TAW848 Features Manual page 79
Advanced hybrid & wireless pbx
Hide thumbs
Also See for KX-TAW848:
- Features manual (584 pages) ,
- Programming manual (480 pages) ,
- Feature manual (250 pages)
Table of Contents
Advertisement
and does not need to be programmed here.
Calls that are exempt from ARS are connected to the user-selected line, via the default
carrier for that line.
[Programming Example: ARS Leading Number Exception Table]
Location
No.
1
555
2
556
3
567
*1
ARS Exception Number [325]
In this example:
555, 556, and 567 are local exchanges. (555-XXXX, 556-XXXX, 567-XXXX)
These calls can be made using any carrier, and are therefore exempt from ARS.
3.
Leading Number Table
Next, store the leading numbers of telephone numbers that should be routed by ARS, and
assign a Routing Plan to each leading number that will control how calls containing these
leading numbers are routed.
When an extension user dials a number which contains a leading number stored in the
ARS Leading Number Table, the call will be routed the corresponding Routing Plan
assigned here. Note that the CO Line Access number is always ignored by ARS and does
not need to be programmed here.
Before programming the details of each Routing Plan (explained below), you can simply
assign here the same Routing Plan number to all the different leading numbers which will
be routed the same way.
If a dialed number matches two or more leading numbers stored in the ARS Leading
Number Table, the lowest numbered location will have priority.
[Programming Example: ARS Leading Number Table]
Location
Leading
No.
No.
1
1212
2
01181
3
01144
*1
ARS Leading Number [321]
ARS Routing Plan Table Number [322]
*2
Additional Number of Digits
In order for calls to be made using the desired carrier, telephone numbers dialed by
extension users must be modified to meet the criteria required by the carrier. (Refer to 5.
Carrier Table.) This modification usually involves removing digits and adding access codes
to the beginning of the dialed number.
In situations where a preprogrammed number (such as an Itemized Billing Code) must be
added automatically after the telephone number that was dialed by the extension user, set
the Additional Number of Digits to a value greater than 0.
Leading No.
Exception
*1
Additional
No. of Digits
*1
7
0
0
1.9 Automatic Route Selection (ARS) Features
Routing Plan
No.
*2
1
5
12
Feature Guide
79
Advertisement
Chapters
Table of Contents
