Download Print this page

Declaration Of Conformity For Rf Exposure - Cisco Aironet 340 Series Hardware Installation Manual

Hide thumbs Also See for Aironet 340 Series:

Table of Contents

Declaration of Conformity for RF Exposure

Note

Cisco Aironet Access Point Hardware Installation Guide

B-6

For the 350 series, the following standards were applied:

Radio: EN 300.328-1, EN 300.328-2

•

EMC: EN 301 489-1, EN 301 489-17

•

Safety: EN 60950

The following CE mark is affixed to the 350 series equipment:

The above CE mark is required as of April 8, 2000 but might change in the future.

This equipment is intended to be used in all EU and EFTA countries.

Outdoor use may be restricted to certain frequencies and/or may

require a license for operation. For more details, contact Cisco

Corporate Compliance.

Combinations of power levels and antennas resulting in a radiated

power level of above 100 mW eirp are considered as not compliant

with the above mentioned directive and are not allowed for use

within the European community and countries that have adopted the

European R&TTE directive 1999/5/EC and/or the CEPT

recommendation Rec 70.03. For more details on legal combinations

of power levels and antennas, contact Cisco Corporate Compliance.

The radio module has been evaluated under FCC Bulletin OET 65C and found

compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and

15.247 (b) (4) addressing RF Exposure from radio frequency devices.

Appendix B

Declarations of Conformity and Regulatory Information

OL-0738-01

Table of Contents

Aironet 350 series