Serial Ports - Siemens RUGGEDCOM RX1501 Installation Manual
Hide thumbs
Also See for RUGGEDCOM RX1501:
- Installation manual (68 pages) ,
- User manual (856 pages) ,
- Reference manual (148 pages)
Table of Contents
Advertisement
Chapter 3
Communication Ports
Figure 38: 2 × T1/E1 with RJ45 Ports (TC2)
The following is the pin-out for the BNC and RJ45 connectors:
Figure 40: RJ45 T1/E1 Pin Configuration
1. RTIP
2. TTIP
3. Chassis
8
Figure 41: RJ45C T1/E1 Pin Configuration
Section 3.5
Serial Ports
The RX1501 supports RJ45 serial ports, which can be run in RS232, RS485 or RS422 mode.
NOTE
On power-up, all serial ports default to RS485 mode. Each port can be individually set to RS232,
RS485 or RS422 mode through ROX II. For more information, refer to the ROX II User Guide for the
RX1501.
All serial ports feature an LED that indicates the current state of the port.
24
Figure 39: 2 × E1 with BNC Ports (E02)
Rx
1
3
1
Tx
2
Pin
Name
1
RRING
2
RTIP
3
Reserved (Do Not Connect)
4
TRING
5
TTIP
6
Reserved (Do Not Connect)
7
Reserved (Do Not Connect)
8
Reserved (Do Not Connect)
RUGGEDCOM RX1501
Installation Guide
Description
Receive Negative
Receive Positive
Transmit Negative
Transmit Positive
Serial Ports
Advertisement
Table of Contents
