Scratching - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
4
01/2008
References
4.4.6 Scratching
Scratching
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Additional information
The user agreement function is only provided if user enabling is
required for at least one axis of the channel.
/FBSI/, Description of Functions SINUMERIK Safety Integrated.
Notes
Depending on the machine data configuration, two scratching modes
are possible.
Function
You can determine the work offset by "scratching" the workpiece,
taking an (active) tool and, if necessary, the basic offset into account.
A window is provided for the "Scratching" function.
Sequence of operations
1. Press the "Scratch" softkey:
The softkey will only be made available if you are entitled to use it
(machine data).
• The active plane is displayed and can be altered.
• The active NV is displayed and can be changed.
• The active tool is displayed. No tool is displayed if none is active
(message).
4
Machine operating area
4.4
JOG mode
4-121
Advertisement
Table of Contents
