Parameter Mode - ABB ACS355 User Manual
Hide thumbs
Also See for ACS355:
- Installation manual ,
- User manual (437 pages) ,
- Quick start up manual (139 pages)
Table of Contents
Advertisement
82 Control panels
Parameter mode
In the Parameter mode, you can:
• view and change parameter values
• select and modify the signals shown in the Output mode
• start, stop, change the direction and switch between local and remote control.
How to select a parameter and change its value
Step Action
1.
Go to the Main menu by pressing
the Output mode, otherwise by pressing
repeatedly until you see MENU at the bottom.
2.
If the panel is not in the Parameter mode ("PAr" not
visible), press key
and then press
of one of the parameter groups.
3.
Use keys
parameter group.
4.
Press
. The display shows one of the
parameters in the selected group.
5.
Use keys
parameter.
6.
Press and hold
display shows the value of the parameter with
underneath indicating that changing of the value is
now possible.
Note: When
simultaneously changes the displayed value to
the default value of the parameter.
7.
Use keys
value. When you have changed the parameter value,
starts flashing.
SET
• To save the displayed parameter value, press
.
• To cancel the new value and keep the original,
press
or
. The display shows the number
and
to find the desired
and
to find the desired
for about two seconds until the
is visible, pressing keys
SET
and
to select the parameter
.
if you are in
until you see "PAr"
SET
and
Display
rEF
LOC
MENU
PAr
LOC
MENU
-01-
LOC
PAR
-11-
LOC
PAR
1101
LOC
PAR
1103
LOC
PAR
LOC
PAR
SET
LOC
PAR
SET
1103
LOC
PAR
FWD
FWD
FWD
FWD
FWD
FWD
1
FWD
2
FWD
FWD
- Quick Links:
- Alarm and Fault Indications
Hide quick links:
Advertisement
Table of Contents
