System Test; Siren Test; Communication Test; Walk Test Mode - Bosch amax 2100 Operation Manual
Hide thumbs
Also See for amax 2100:
- Installation manual (164 pages) ,
- Quick start manual (38 pages) ,
- User manual (36 pages)
Table of Contents
Advertisement
28
en | System test
6
System test
6.1
Siren test
This function allows the users to test the siren.
4
P
6.2
Communication test
This function allows the users to send a test report to a central
monitoring station.
1.
2.
6.3
Walk test mode
This function allows users to test detection devices to ensure
they are functioning correctly. Bypass any zones that are not
required for testing before activating the walk test mode.
During the walk test, no walk test report is sent out to the
control panel system.
How to select walk test mode
1.
2.
P
How to exit walk test mode
4
2017.04 | 07 | F.01U.295.569
Enter your code + [4] [1] and press [#].
The system beeps twice and the siren is activated for one
second.
Enter your code + [4] [2] and press [#].
The system beeps twice and a test report is send.
The keypad displays the status of the test report for all
communication paths.
Press [#] to exit.
Enter your code + [4] [3] and press [#].
The system beeps twice and the STAY and AWAY indicators
flash.
Unseal and seal the zones to be tested.
The system beeps. The siren beeps once each time a zone
status is changed.
Enter your code + [4] [3] and press [#].
Bosch Sicherheitssysteme GmbH
AMAX panel
- Quick Links:
- User Menu
Hide quick links:
Advertisement
Table of Contents
