System Control-Program Update-Update Program File - Panasonic KX-NS1000 Pc Programming Manual
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Pc programming manual (1294 pages) ,
- Programming manual (1182 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
5.1.2 System Control—Program Update—Update Program File
5.1.2 System Control—Program Update—Update Program File
Once updated programme files have been downloaded and are stored on a PBX, they can be used to update
the system files of the PBX. The update process can be set to be automatically performed at a specified time,
or the update process can be carried out manually.
You must be connected to the PBX in On-line mode to update programme files.
Note
Before updating programme files, we strongly recommend making a backup of all system files. For details,
refer to the following:
–
6.1 Tool—System Data Backup to USB
–
6.9 Tool—UM Data Backup
For Program Update Type, select Immediately or Timed Update.
Immediately (Manual update)
Specify which cards or devices to update, and perform the update immediately.
1.
In Email Notification, specify up to 2 e-mail addresses that will receive a notification when programme
files have been updated.
2.
Updated programme files that can be used to update cards or devices installed in the system are listed in
Available Program File(s). In Select the target to update, specify which cards or devices will be updated
using the files listed by checking the boxes next to each item.
Note
When selecting an item, a warning message may be displayed. Confirm the contents of the warning,
and then click OK to continue.
3.
Click Apply.
4.
Click on another PBX site tab to programme another PBX in the One-look network as required, and then
repeat steps 1–3. Perform settings for each PBX in the One-look network as required.
5.
Click Execute.
The programme files are updated to the specified PBXs.
Note
•
Updated PBXs reset when the update is complete.
•
If this operation is performed when logged in to a Slave unit only the PBX mother board and hardware
specifically registered to the Slave unit may be updated.
Timed Update (Automatic update)
Specify which cards or devices to update and a time to execute the update.
1.
In Email Notification, specify up to 2 e-mail addresses that will receive a notification when programme
files have been updated.
2.
Updated programme files that can be used to update cards or devices installed in the system are listed in
Available Program File(s). In Select the target to update, specify which cards or devices will be updated
using the files listed by checking the boxes next to each item.
Note
When selecting an item, a warning message may be displayed. Confirm the contents of the warning,
and then click OK to continue.
3.
In Update Time, specify the time of day when the update will be executed.
4.
Click Apply.
5.
Click on another PBX site tab to programme another PBX in the One-look network as required, and then
repeat steps 1–4. Perform settings for each PBX in the One-look network as required.
80
PC Programming Manual
Hide quick links:
Advertisement
Table of Contents
