Section 1 - Product Overview
1
2
COMPONENT
1
HDD Access Latch
Cooling Fan
2
3
10/100 Ethernet LED
Gigabit Ethernet LED
4
5
Security Lock
6
Power Receptacle
7
Gigabit Ethernet Port
8
USB 2.0 Port
D-Link DNR-322L User Manual
Rear Panel
Press the latch to release the top panel for inserting or removing the hard drives.
A temperature controlled cooling fan cools the hard drive(s). Do not cover or obstruct this outlet.
When the temperature inside the unit is below 49 °C the fans rotate at low speed.
When the temperature inside the unit is above 49 °C the fans rotate at high speed.
A solid yellow light indicates a 10/100 Mbps Ethernet connection is established and will blink during data
transmission. This LED will stay off when connected to a Gigabit device.
A solid green light indicates a 1000 Mbps Gigabit Ethernet connection is established and will blink during data
transmission.
A security device can be attached to the unit to prevent theft.
Connect the supplied power cord to the receptor.
Use the Gigabit Ethernet port to connect the NVR to your local network.
The type A USB 2.0 port supports connections to UPS devices for power state monitoring.
3
4
5
6
7
8
DESCRIPTION
10