Table of Contents
Advertisement
3.3.5 Multiple Power Supply
[Function]
- AC input：AC100∼240V
（50／60Hｚ）
DC output：＋5V
＋12V
＋24V
[Note at the replacement]
- At the replacement, be sure to
turn off the power.
3.3.6 High voltage power supply
[Function]
- Deflecting voltage output
Charged original voltage output
[Note at the replacement]
- Before replacement, be sure to
turn the power off.
- If the high-voltage lines are
dusty, an abnormality may
arise due to a leak of high voltage.
Wipe the dust off the lines in
the case where they are dusty.
Caution against an electric shock
The high voltage power supply has a
portion where high voltage is applied.
When performing the adjustment or the like
in a state where the operation panel cover
is opened, be fully careful about an electric
shock.
Fixing screw
(4 locations)
Fixing screw
(4 locations)
AC input for
connection to the
relay connector
from the terminal
:DC5.7kV MAX
:DC500V
Two studs
for fixing
Two fixing
screws
High-voltage lines
Deflecting voltage output
(Max DC5.7kV)
3-30
DC output for
CN9 of EZJ93
board.
Fixing screw
(4 locations)
Fixing screw
(4 locations)
Control signal input
for CN6 of EZJ106
Two fixing
screws
Two studs
for fixing
Charged original
voltage output
（DC500V）
- Quick Links:
- Service Manual
- Maintenance Work
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
