GPS position
Altitude
Note
Update of the displayed GPS satellites with the CMR2040
If GPS reception deteriorates, for example due to position change or removing the antenna,
with the CMR2040 the satellites are displayed with a delay of up to 10 minutes.
Updating the displayed values
If you enable automatic updating of the display at the top right on the start page, the
displayed values are updated every 5 seconds.
For manual updating, with some Web browsers you can use the F5 key.
LOGO! CMR2020,
LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
Current position: <latitude>, <longitude>
Conversion o sexagesmal coordinates:
Places before the point Degree
•
1. + 2. Decimal place: Minutes
•
3. + 4. Decimal place: seconds
•
5. + 6. Decimal place: Hundredths of seconds
•
Display of the hemisphere and the position to the Meridien:
Latitude: Positive values for north, negative values for south
•
Longitude: Positive values for east, negative values for west
•
Height (m above sea level)
Configuration (WBM)
5.5 Start page
69