Table of Contents
Advertisement
14
Connections (cont'd)
Connecting to a TV without Audio/Video jacks
If your TV does not have Audio/Video jacks, you must
use an RFU adapter (not supplied) to connect the
Internet Terminal to your TV.
1
Set the channel switch on the RFU adapter to VHF
channel 3 or 4, whichever is not used or least used in
your area.
2
Connect the RFU adapter to the VIDEO and AUDIO
OUT jacks on the Internet Terminal.
3
Use a RF coaxial cable to connect the ANTENNA
OUT jack on the adapter to the ANTENNA IN jack
on the back of your TV.
You may need to disconnect the antenna/cable from
your TV to make this connection. Connect the anten-
na/cable to the ANTENNA IN jack on the RFU
adapter.
4
Connect one end of the telephone cable to the
Internet Terminal's TEL LINE jack. Connect the other
end to your home's telephone outlet.
5
Connect one end of the AC power cord to the
Internet Terminal's AC INPUT jack. Connect the other
end to an AC outlet.
6
Set your TV to channel 3 or 4, whichever channel the
adapter is set to, when using the Internet Terminal.
Back of Internet Unit
RFU Adapter
TV
RF Coaxial Cable
Phone
Cable
Connect your cable
or antenna to the
ANTENNA IN jack
75V
ANT /
CABLE
on the RFU adapter.
AC
Power
Cord
Advertisement
Table of Contents
