210] Customer On/Off Per Tenant - Samsung OfficeServ 7000 Series Programming Manual
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (487 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
[ 210] CUSTOMER ON/OFF PER TENANT
6 7 B
Allows the system administrator to set system features on a per-tenant basis. Each system
option has a corresponding dialling number, as listed below. All options toggle ON/OFF.
No
Option
00
DISA PSWD
01
LCR ENABLE
03
PERI UCD RPT
04
CID CODE INS
05
DISA MOH
06
TRANSFER
MOH
08
DID BSY ROUT
09
ALARM MOH
13
RECALL PIKUP
Samsung Business Communications
Default
ON
When ON, a caller must enter extension number and DISA
password when they call a DISA trunk. When OFF, extension
number and DISA password are not required and the caller
has full access to all features allowed on this trunk.
OFF
This option determines whether the system will or will not
route outgoing calls based on the information in the LCR
routing tables
OFF
Periodic UCD Information provider. Enables UCD Statistics
data on a per-UCD group basis to print out on the IO port
which has been set as PERI UCD in real time(every 3~99
seconds). This allows the information to be interfaced and
manipulated by an external package or third party provided
software.
OFF
When ON, the system will insert the country code when re-
ceiving CID information. This feature can use the CID display
callback feature.
OFF
When ON, outside parties will hear trunk MOH instead of dial
tone from the time the system answers a DISA trunk until the
caller dials a digit.
OFF
When ON, outside parties will hear trunk MOH instead of
ringback tone from the time a transfer is completed until the
call is answered by an internal party.
OFF
When ON, a DID call directed to a busy station will re-route
to the destination in MMC 406 for that trunk, if CW is set to
OFF in MMC 714. If the CW option is set to ON the call will
camp on. When OFF and the CW option is set to OFF, the
call will re-route to the operator.
ON
When ON, a station user answering an alarm ring will hear
station MOH instead of dial tone.
OFF
When ON, a call recalling to a station can be picked up using
Direct Call Pickup, Pickup Group and My Group features.
This applies to held calls recalling and transferred calls re-
calling to a station.
CHAPTER 2. MMC Programming
Description
2-55
Advertisement
Table of Contents
